Ramp questions
About the PATHWAY HD commercial ramp, new
Can the ramp turn a corner?
Yes. You can configure a straight run, or turn left or right with a turn platform. A switchback uses a turn-back platform, and custom-angle platforms are available. We plan the layout at your free assessment.
How is the PATHWAY HD rated?
EZ-ACCESS rates PATHWAY HD ramp sections, platforms, and stairs for a uniform live load of 100 lb per square foot, and a 300 lb concentrated vertical load.
Is the PATHWAY HD code compliant?
EZ-ACCESS designs the PATHWAY HD system to meet ADA, IBC, OSHA, and most local code guidelines. Site-specific stamped drawings are available.
Is bracing needed?
EZ-ACCESS says bracing is needed on ramps, platforms, and steps with rises of 36 in and above, with additional bracing at 72 in and above.
Can stairs be part of the system?
Yes. PATHWAY HD stairs can be built into a ramp system, used with PATHWAY HD platforms, or used on their own.
Do you price match?
We match brand for brand against any authorized dealer.
What warranty comes with the PATHWAY HD?
EZ-ACCESS gives a 3-year limited warranty against defects in material and workmanship on PATHWAY HD parts and components for the original purchaser. See the EZ-ACCESS 3-year warranty document for its terms.
Choosing a ramp
What types of ramps do you offer?
EZ-ACCESS PATHWAY 3G modular aluminum ramps that our team measures and installs (new, used or rental), EZ-ACCESS SUITCASE folding ramps you can carry, and EZ-ACCESS TRANSITIONS threshold ramps for raised doorways.
How long does my ramp need to be?
A common reference is a 1:12 slope: one inch of rise for every 12 inches of ramp. At that slope, a 12-inch rise needs about 12 feet of ramp, and a 24-inch rise about 24 feet, plus landings. We measure your entrance at a free assessment.
What does the ADA say about ramp slope?
The U.S. Access Board explains the ADA's maximum running slope for ramps as 1:12 and recommends gentler slopes where possible. Rules for private homes can differ, so ask us which requirements and local permits apply to your project.
What brand are your installed ramps?
Our installed modular ramps are the EZ-ACCESS PATHWAY 3G Modular Access System for homes and the EZ-ACCESS PATHWAY HD Code Compliant Modular Access System for commercial sites, both made in the USA from welded aluminum. EZ-ACCESS rates PATHWAY 3G ramps and platforms for 1,000 lb. PATHWAY HD is rated for a 100 lb per sq ft live load and a 300 lb concentrated load.
What material is best for a ramp?
We work with aluminum ramps. EZ-ACCESS describes the PATHWAY 3G as maintenance-free welded aluminum that will not deteriorate outdoors, and the modular sections can be reconfigured if your needs change.
Do you price match?
Yes. We match brand for brand against any authorized dealer.
Is an aluminum ramp slippery?
Our ramps have slip-resistant surfaces, but slip-resistant does not mean ice-proof. Clear snow, ice, wet leaves and debris before use. EZ-ACCESS suggests a plastic shovel to protect the surface.
Should I get a ramp or a stairlift?
A ramp lets someone stay in a wheelchair or scooter, so it is usually the answer at an outside entrance. A stairlift needs the rider to sit and transfer, and suits indoor stairs. We can look at both during one assessment.
Installation
What happens at the free ramp assessment?
We measure the height of the entrance, look at the landing, the approach and the space you have, and talk about the wheelchair, scooter or walker being used. Then we recommend a ramp length and layout. Most assessments take about an hour, and there is no obligation.
Can I install a ramp myself?
Portable SUITCASE ramps and TRANSITIONS threshold ramps are set up by you, following the EZ-ACCESS instructions. Modular ramps are measured and installed by our team; EZ-ACCESS requires its PATHWAY 3G modular system to be installed by a qualified installer.
Do I need a permit for a ramp?
It depends on your town and the project. EZ-ACCESS says permits are typically not required for the PATHWAY 3G, but local rules vary, so ask about permits at your assessment.
Does a modular ramp need concrete footings?
Not for the PATHWAY 3G. Its adjustable support legs stand on large polymer base feet, so no poured footers or concrete pads are needed, and nothing is built onto the house.
How much does ramp installation cost?
Installation quoted after your free assessment. The cost depends on the length and platforms your entrance needs.
Where do you install ramps?
We install and service ramps within 40 miles of West Springfield. Recent installs include Ware, Springfield, South Hadley, Southwick and Granville.
Rentals, warranty and buyback
Can I rent a ramp?
Yes. Ramp rentals are month to month. You can keep renting, buy the ramp with 100% of your rental payments applied toward the purchase, or end the rental when you no longer need it. Call or text for rental pricing.
What coverage comes with a ramp?
PATHWAY HD carries the EZ-ACCESS 3-year limited warranty against defects in material and workmanship on parts and components for the original purchaser. See the EZ-ACCESS 3-year warranty document for its terms.
Will you buy my ramp back when I no longer need it?
Yes. We buy back ramps we sold for 20% of the entire cost, with no takeaway fees, no matter the age of the ramp. Call 413-733-7843 or text 413-200-4191 to start.
How do I take care of an aluminum ramp?
Keep it clear of leaves and debris, keep drainage paths open, and check the handrails and support points after heavy snow or freeze-thaw cycles. Call us if anything feels loose.
How much does a ramp cost?
Installation quoted after your free assessment, because the cost depends on the length and platforms your entrance needs. We match brand for brand against any authorized dealer. Ramp rentals: call or text for rental pricing.